Simple Controller For Nintendo Switch Lite

- Nov 06, 2019-

1.Product Introduction

Switch single-rocker simple bluetooth controller: it is a single-rocker and small-sized controller designed according to the game mode of Switch one-handed controllers. Connected by bluetooth pairing; the 3D rocker can be switched into three function modes through key combination (mode 1: default left 3D rocker; mode 2: right 3D rocker; mode 3: left cross key), which is applicable to different game demands. The motor vibration can enhance the motion sensing in the game; there are four connecting channel indicators to guide gamers to connect channels; with small size, beautiful appearance, excellent sense of grip, this product should be a necessary thing for gamers. 


 

2.Product Parameter (specification)

Material:

 

Single package size: 

 

Number/Carton

ABS

 

547*340*425mm

30pcs

 

 

 

3.Product Feature and Application

* Wireless connection of bluetooth mode. 

* Built-in 400mAh/ 3.7v high-energy polymer lithium battery.

* Support the upgrade of USB wired system.  

* Function keys: key A, key B, key X, key Y, key +, key -, key L, key R, key ZI, key ZR, key HOME, left 3D rocker and key L3. The left 3D rocker can be switched into right 3D rocker, press R3 key and cross key function.  

* The function of motor vibration and connecting channel indicators are provided.   

* The production is of beautiful appearance, small size and excellent sense of grip.   

 Input working voltage of the controller: 5VDC


 

4.Product Details

 

switch lite controller

Bluetooth pairing and connection:

In the off state, long press the key Y+ key Home for about 2 seconds to enter the bluetooth search mode. The LED channel indicator flashes rapidly by the “1-4-1” horse race. After the connection is successful, the corresponding channel indicator is always on.

Attention: It will enter into auto sleep if the bluetooth connection is not successful within 3 minutes; if the bluetooth connection is successful, the LED indicating lamp shall be always on (the channel lighting is assigned by the console).


 

nintendo switch lite controller

Instructions to Startup and Back Connection:

Press the HOME key for 2 seconds for startup; it enters into the back-connection search mode. The LED channel indicator flashes slowly by the “1-4-1” horse race. After the back connection is successful, the corresponding channel indicator is always on. 

Press the HOME key for 2 seconds to start up the controller; the controller will automatically back connect to the console paired previously; if the back connection is not successful within 10 seconds, it will enter into the auto sleep status.

Press the HOME key for 2 seconds to start up the controller; other keys have no startup function.

In case of failed back connection, it should be paired and connected again.

 

wireless controller for nintendo switch

Charging Indication and Charging Characteristics:

When the controller is turned off for charging: all LED indicators will flash slowly by "1-4”. After being fully charged, all LED lights will turn off. 

When the controller is charged with bluetooth connected to the Switch console: the channel LED indicator which is connected currently flashes slowly, and the channel indicator will be always on after the controller is fully charged.

In case of charging, pairing & connection, back connection and low battery alarm, the LED indicating status of pairing & connection and back connection shall be presented priority.

Type c USB charging: input voltage 5VDC, input current 140mA.

Shutdown and Auto Sleep:

Turn off the controller (shutdown): the bluetooth shall be disconnected and enter into sleep status after the HOME key is long pressed for 5 seconds.

The Switch console screen is shut down, and the controller enters into sleep status automatically.

If no keys of the controller are pressed within 6 minutes, it will enter into auto sleep status.