Nintendo Super Smash Bros

- Jul 04, 2019-

1.Introduction

Switch+WIIU+PC three-in-one GC controller converter connects 1-4 Game Cube controllers with Switch, WIIU game machine and PC computer through USB cable of the converter. Two switches are designed to realize the conversion of Switch, WIIU and PC. SWICH and WIIU are automatically identified in the same mode. PC is a independent mode. Connecting the computer with two USB cables can enhance the current stability of the vibrating controller. A USB 2.0 extension interface has also been added without affecting the external connection of the computer. The appearance design of product is smaller, more beautiful and more practical.

2.Picture

TNS-1894 1

3. Product Characteristics:

3.1. Up to 4 controllers of Game Cube can be connected at the same time;

3.2. There are three types of console free transfer switches such as Switch, Wiiu and PC;

3.3. Using two USB cables to connect the computer can enhance the stable use of the vibrating controller and also extend a USB interface of the computer.

3.4. Convenient connection, compact and beautiful product design and strong practicability.

4. Instruction of Mode Operation

4.1. Switch Mode:

    1. Turn the mode transfer switch on the converter to Switch/WiiU mode.

    2. After connecting to the Switch video base and TV set, insert the two USB cables of the converter into the USB interface on the Switch video base and connect the Game Cube controller, which can be used normally


4.2. WIIU Mode: ( Game discs must support Game Cube game controllers )

     1. Turn the mode transfer switch on the converter to Switch/WiiU mode.

     2. After coonecting to the WIIU game console and entering the game, insert the two USB cables of the converter into the USB interface on the WIIU console, and then connect the Game Cube controller, which can be used normally. ( Note: The controller can only operate the game normally after entering the game screen ).

 

4.3. PC Computer Mode:

    1. Insert the two USB cables of the converter into the USB interface on the PC computer console, and then connect the Game Cube controller. The Game Cube controller can be tested in the game controller operation interface. The control interface has four controller windows, and can be used normally by clicking on the corresponding interface interface.