1、Brief Introduction of the product
Switch clip battery pack is a mobile power product designed for Switch console design with built-in 10000mAH high polymer lithium battery; Switch console can be directly installed in the battery clip bag to carry, and it can charge while discharging to the Switch main engine and battery pack at the same time, no need to remove the Switch console to charge seperately; you can use the original Switch power or standard Type_C power supply for charging directly; the appearance of product is simple and nice. Convenient and practical, it is a necessity for Switch game player on traveling.
2、Product picture:
3, The characteristics of the product:
1, The MCU processor is controlled by the intelligent microchip management chip
2,Intelligent precision protection circuit: Voltage overcharge protection, voltage overplay protection, current overload protection,
3, High efficiency conversion output circuit, 10000mAH high capacity polymer lithium battery energy storage electric core;
4, Support charging & discharging to Switch Console and power bank stand at the same time
5, The power input interface adopts the Type_C interface.
6,The built-in battery uses 4 lights to indicate the power of the battery.
7,Switch Console can be directly installed in the power bank stand to carry
8,The Switch Console can be installed directly on the back clamp of power bank stand.
9,It can be charged to the Switch Console and grip at the same time for once;
4、Environmental conditions:
Serial number | project | Technical indicators | Unit | Notes |
1 | working temperature | -20~40 | ℃
| |
2 | Storage temperature | -40~70 | ℃
| |
3 | Relative temperature | |||
4 | Heat dissipation mode | Natural air cooling |
5、Electrical characteristics
1 | input characteristics of power charger | |||||||
Serial number | project | technical parameter | Unit | Notes | ||||
1.1 | Rated input voltage of power supply | 15V | Vdc
| Type-c interface PD protocol | ||||
1.2 | Power input voltage range | 14.6V-15.4V
| Vdc
| |||||
1.3 | conversion efficiency | 80% | ||||||
1.4 | Input current | 2.6 | A | |||||
1.5 | Battery charging time | ≦6 Less than or equal to 6 | H | |||||
2 | Discharge characteristics of battery | |||||||
Serial number | project | technical parameter | Unit | Notes | ||||
2.1 | Battery discharge output | 15V | Vdc
| Type-c interface PD protocol | ||||
2.2 | Power output voltage range | 14.6V-15.4V
| Vdc
| |||||
2.3 | Output current | 1.2 | A | |||||
2.4 | conversion efficiency | 80% | ||||||
2.5 | standby power | <330uA
| The longest standby time is 42 days | |||||
2.6 | Switch console charging: | about 2.5 hours | About 1 time for fully charging |